Table of Contents
Advertisement
CONTROLS AND THEIR FUNCTIONS
About the display
This section explains what the various display indicators mean.
1
VIRTUAL
This indicator appears when this unit is using Virtual 3D.
2
USB
This indicator appears when audio signals are sent or
received via the USB terminal.
* If you use a Macintosh computer, this indicator is
always illuminated when this unit is connected to the
computer via the USB terminals.
3
(DTS)
This indicator appears when an input signal is decoded
with DTS.
4
PCM
This indicator appears when a PCM digital audio signal
is selected as the input source.
5
This indicator appears when headphones are
connected to the headphone jack of this unit.
6
5.1CH
This indicator appears when a 5.1 channel digital audio
signal is selected as the input source.
7
DSP
This indicator appears when the DSP is processing the
input signal.
8
Sound output indicator
This indicator shows the currently used speakers. A red
dot shows that the corresponding speaker is currently
used, or the speaker is set for use in the Application
Software. The
* When using the test tone, a red dot shows the
channel currently outputting the test tone.
* When using headphones, only the two dots for the left
and right front speakers appear regardless of the
setting in "Speaker Settings".
8
E-
1
VIRTUAL
A
DIGITAL
B
PROLOGIC FM
C
D
VOL
mark shows that sound is outputted.
2
3
4
5
6
7
5.I
CH
D. DSP
USB PCM
ST
E
9
D.
This indicator appears when an audio signal encoded
with Dolby Digital is selected as the input source.
0
ST
This indicator appears when a stereo broadcast is
received in stereo mode.
A
(DOLBY) DIGITAL
This indicator appears when an input signal is decoded
with Dolby Digital.
B
(DOLBY) PROLOGIC
This indicator appears when an input signal is decoded
with Dolby ProLogic.
C
FM
This indicator appears when the built-in FM tuner is
selected as the input source.
D
Multi-information display
Various messages and information appear here.
E
VOL (volume)
This indicator graphically displays the volume level
setting.
Note
The indicators
sound signals are decoded on the computer (by using DVD-
playback software, etc.).
8
9
0
, "5.1CH" and
will not appear when
Advertisement
Chapters
Table of Contents
