Adjustment Of The Center Level; Adjustment Of The Rear Level - Yamaha RX-V890 Owner's Manual

The following adjustments can be done on the remote control transmitter as well as on the front panel.

Adjustment of the CENTER LEVEL

You can adjust the sound output level of the center
channel speaker even if the output level is already set
in "Speaker balance adjustment" on page 15.
LEVEL
CENTER
Press the "+" or "–" CENTER LEVEL key on the
remote control transmitter. As you change the volume
level, the front panel LCD will display the value. If
you press the "+" or "–" key continuously, the level
will continuously change except for a momentary
pause at the preset point (80).

Adjustment of the REAR LEVEL

You can adjust the sound output level of the rear
speakers even if the output level is already set in
"Speaker balance adjustment" on page 15.
LEVEL
REAR
Press the "+" or "–" REAR LEVEL key on the remote
control transmitter, the level value changes continu-
ously. However, the value stops changing momen-
tarily at the preset point (80).
28
• The center channel speaker is used only in DOLBY
PRO LOGIC, DOLBY PRO LOGIC ENHANCED,
70 mm MOVIE THEATER, TV THEATER and
SPORTS modes.
• Once the output level is adjusted, the level value
will be the same in all the digital sound field
programs.
Note:
If the digital sound field program STADIUM, ROCK
CONCERT, JAZZ CLUB, CHURCH, or CONCERT
HALL is selected, the CENTER LEVEL control will not
function.
• Once the output level is adjusted, the level value
will be the same in all the digital sound field
programs.