Adjustment Of The Center Level; Adjustment Of The Rear Level - Yamaha R-V98 Owner's Manual

Natural sound stereo receiver 5 speaker configuration
Table of Contents

Advertisement

Adjustment of the CENTER level

If desired, you can adjust the sound output level of the center
speaker with this control even if the output level is already set
in "Speaker balance adjustment" on page 12.

Adjustment of the REAR level

If desired, you can adjust the sound output level of the rear
speakers with this control even if the output level is already set
in "Speaker balance adjustment" on page 12.
Adjustment of DELAY TIME
You can adjust the time difference between the beginning of
the source sound and the beginning of the effect sound with
the DELAY TIME keys.
The DELAY TIME keys are effective with all programs.
By applying more or less delay, sound effects, background
noise, and ambient noise coming at you from the rear speakers
can be enhanced or subdued for extra effect.
1.
PRO LOGIC
: from 15 to 30 milliseconds
(Preset value: 20 milliseconds)
2.
PRO LOGIC
: from 15 to 30 milliseconds
ENHANCED
(Preset value: 20 milliseconds)
3. CONCERT VIDEO : from 1 to 100 milliseconds
(Preset value: 25 milliseconds)
4. MONO MOVIE
: from 1 to 100 milliseconds
(Preset value: 25 milliseconds)
5. ROCK CONCERT : from 1 to 100 milliseconds
(Preset value: 15 milliseconds)
6. CONCERT HALL : from 1 to 100 milliseconds
(Preset value: 30 milliseconds)
CENTER
0
I0
REAR
0
I0
If the digital sound field program is in the CONCERT
VIDEO, MONO MOVIE, ROCK CONCERT or CONCERT
HALL mode, this adjustment is unnecessary.
Once the output level is adjusted, the level value will be the
same in the DOLBY PRO LOGIC and DOLBY PRO LOGIC
ENHANCED modes.
If a digital sound field program is not used, this adjustment
is unnecessary.
Once the output level is adjusted, the level value will be the
same in all the digital sound field programs.
If a digital sound field program is not used, this adjustment
is unnecessary.
By continuously pressing "+" or "–" key, the value changes
continuously.
However, the value stops changing momentarily at the
preset point.
+
DELAY
TIME
Notes
Adding too much delay will cause an unnatural effect with
some sources. Experiment with the DELAY TIME keys to
create the effect that you find most suitable.
The values of the DELAY TIME you set the last time will
remain memorized even when the power of this unit is off.
However, if the power plug cord is kept disconnected for
more than two weeks, these values will be invalid.
Adjustable
DELAY
ms
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents