Yamaha RX-V890 Owner's Manual page 12

4 FRONT CH — MAIN IN terminals
These terminals are for line input to the built-in
front channel amplifier. Leave the jumper bars
connected to the PRE OUT terminals when you use
the built-in amplifier.
However, if you drive front speakers with an
external stereo power amplifier, remove the
jumper bars.
5 FRONT CH — PRE OUT terminals
These terminals are for front main channel line
output. Leave the jumper bars connected to the
MAIN IN terminals when you use the built-in
amplifier.
However, if you drive front speakers with an
external stereo power amplifier, remove the
jumper bars and connect the input terminals of the
external amplifier (MAIN IN or AUX terminals of
a power amplifier or an integrated amplifier) to
these terminals.
12
TAPE 2
REC
OUT
4
MAIN
IN
FRONT
CH
5
PRE
OUT
6
0dB
FRONT
LEVEL
- 10dB
6 FRONT LEVEL switch
Normally set to "0 dB". If desired, you can de-
crease the output level at the FRONT SPEAKERS
terminals by 10 dB by setting this switch to
"–10 dB".