Reverb + Early Reflections (Rev + Er) - Yamaha ProR3 Owner's Manual

22
Advanced uses (2) – Editing functions –
Reverb + Early Reflections (Rev + ER)
Key Parameter
MAIN
REV RevTime
REV IniDelay
REV HighRatio
REV LowRatio
REV Diffusion
ER Type
ER IniDelay
ER Liveness
ER RoomSize
ER Diffusion
FINE
ER/REV Balance *2
REV Rev Mix *3
REV Reverb Type
REV Density
REV HPF
REV LPF
REV Space Mod
ER Number
ER Density
ER HPF
ER LPF
REV Patch
Common parameters
*1 Small Hall, Large Hall, Random, Reverse, Plate, Strings
*2 Only when REV Patch is parallel (Reverb + ER)
*3 Only when REV Patch is serial (Reverb
*4 Hall, Room, Vocal, Plate
*5 Reverb + E.Ref., E.Ref.
ProR3 Digital Reverberator
Value
0.3 ~ 99.0 s
0.1 ~ 200.0 ms
X0.1 ~ X1.0 Refer to "Reverberation" items on page 18
X0.1 ~ X2.4
0 ~ 10
*1
0.1 ~ 100.0 ms
0 ~ 10 Refer to "Early reflection" items on page 19
0.1 ~ 25.0
0 ~ 10
0/100 ~ 100/0 Level balance of ER and reverb
0 ~ 100% Reverb amount
*4 Type of reverb tone
0 ~ 100 Density of reverb
Thru, 40 Hz ~ 1.0 kHz Cutoff frequency of reverb high pass filter
400 Hz ~ 20 kHz, Thru Cutoff frequency of reverb low pass filter
0 ~ 10 Modulation level of reverb
1 ~ 14 Number of early reflections
0 ~ 100 Density of early reflections
Thru, 40 Hz ~ 1.0 kHz Cutoff frequency of ER high pass filter
400 Hz ~ 20 kHz, Thru Cutoff frequency of ER low pass filter
*5 Connection of reverb and ER
Refer to "Common parameters" on page 27
ER, ER
Reverb, Reverb E.Ref.
Description
Reverb)