Fluke DTX-GFM2 User Manual page 33

A
Tester with fiber module and connector adapter
installed (match connector adapter to the connectors in
the link)
B
Memory card (optional)
C
AC adapter with line cord (optional)
D
Reference test cord. Match the fiber to be tested. Long
end must have SC connector. For the other connectors,
match the connectors in the link
Figure 10. Equipment for Testing in Loopback Mode (Method B)
E
Two adapters of the appropriate type
F
Mandrel. Recommended when testing multimode fiber
with a DTX-MFM2 module. See page 12.
G
Fiber cleaning supplies
Certifying Fiber Cabling
amd49f.eps
27