Replacement Of Control Circuit Board - Samsung MW73VR Service Manual

3. Disassembly and Reassembly

3-5 Replacement of Control Circuit Board

Parts
Removal of
Control Box
Assembly
Removal of Ass'y
P .C .B Assembly
Removal of
Window Display
& Membrane
Panel
Explaination Photo
Control Box
ASSY PCB
Control Panel
1. Be sure to ground any static electric
charge in your body and never touch
the control circuit .
. Disconnect the connectors from the
control circuit board .
3. Remove screws securing the control
box assembly .
4. Remove the screw securing the
ground tail of the keyboard .
Screw
1. Pull the lever end of the plastic
fastener and remove the Flexible
Printed Circuit(FPC) of membrane
panel .
. Remove screws securing the control
circuit
SCREWS
board .
3. Lift up the control circuit board from
the Ass'y control box .
4. When reconnecting the FPC
connector, make sure that the
holes on the connector are properly
engaged with the hooks on the
Plastic Fastener .
1. Window display should not be
disassembled as its mounting tabs
will be broken . If repair work is
difficult, replace with Ass'y control
panel .
. The membrane key board is
attached to the escutcheon base
with double faced adhesive tape .
Therefore, applying hot air such as
using of hair dryer is recommended
for smoother removal .
3. When installing new membrane key
board, make sure that the surface
of escutcheon base is cleaned
sufficiently so that any problems
(shorted contacts or uneven surface)
can be avoided .
14
Explaination