Table of Contents
Advertisement
AUDIO OUT SET UP menu
Key
Key designation
1
F10
STYLE°
F11
RATE CON°
F12
STATE
F13
AUTO CPY°
3
1
The data mode is operational only in the 4-channel audio versions of the 1080/59.94i and 720/59.94p system
°
formats.
1
The items on this menu can also be set on the AUDIO IN SETUP menu. If the setting is updated on one menu, it
°
will be updated on the other menu as well. Furthermore, these settings cannot be performed on a channel by
channel basis.
2
RATE CON ON/OFF function
°
1
This menu item can be set on the AUDIO IN SET UP menu as well. When its setting is changed on one of the
°
menus, the change will be reflected on both menus.
3
This item appears only when an audio 4-channel format (1080/59i, 720/59p or 480/59i) has been selected.
°
This menu item can be set by pressing the F10 key together with
the F key.
PCM: The style is set to the normal PCM audio mode.
DATA: The style is set to the data mode (compressed audio:
2
This enables recording and playback to be conducted either
through the rate converter in the AUDIO I/O area and with the
digital filter activated (function ON) or with the rate converter
bypassed and the digital filter remaining inactive (function OFF).
ON: For recording and playback through the rate converter.
OFF: For recording and playback with the rate converter bypassed.
Transfers the VTR to the AUDIO OUT SET UP STATE menu
screen. (See page 70.)
This enables the sound of channels 1 through 4 to be output to
the audio AES output and embedded audio output channels 5
through 8 even when an audio 4-channel format or 4-channel
tape is to be played back.
ON: The sound of channels 1 through 4 is output to channels
5 through 8.
OFF: The sound is not output to channels 5 through 8.
ONoteN
If the CH1-4 setting on the AUDIO OUT SDI ASSIGN MENU is
OFF, the sound is not output to embedded audio output
channels 5 through 8 even when ON has been selected as the
setting of this menu item.
Description
Dolby-E).
– 67 –
Advertisement
Table of Contents
