Editing Parameters - Yamaha P-200 Owner's Manual

NOTE
The Edit function page numbers appear in the upper right corner of the
screen. When Non Auto Store is selected and Edit mode is engaged, the
letter S, P or V will appear to the right of the page number to indicate which
type of parameters you are editing System, Performance or Voice
parameters, respectively.
MASTER TUNE
NOTE
Channel, Local, CS FC and PS settings are basically classified as
Performance parameters, though they are treated as System parameters
when Sys is selected for MIDI Channel, Local or Controller Assign in the
Performance Enable function (System Menu), see page 52. When Sys has
been selected, the letter S will appear to the right of the page number,
replacing the letter P.
LOCAL
ENTERING AND EXITING EDIT MODE
Press the [EDIT] button.
The LED above the [EDIT] button starts blinking, as does the
LED above the [EDIT SELECT] button which was active the
last time you exited Edit mode. The name of the currently
active parameter page appears in the LCD screen.
PERF. A
EDIT PERF. B
MASTER TUNE
Each of the 12 [EDIT SELECT] buttons is dedicated to one or
more Edit functions, as indicated by a name printed in green
below each button.
To exit Edit mode, simply press the [EDIT] button again, which
returns you to the previous Play mode.
%s
440.0Hz
%s
on
1
VOICE PIANO 1
SYSTEM
%s
440.0Hz
SELECTING AN EDIT FUNCTION
Press an [EDIT SELECT] button.
The LED above the button you press starts blinking, and the
name of the currently active parameter page appears in the
LCD screen.
MASTER TUNE
SELECTING EDIT FUNCTION PAGES
Press the [PAGE] button once or more.
Each time you press the [PAGE] button a page will appear in
the LCD screen.
You can also select Edit function pages by pressing the same
[EDIT SELECT] button once or more. For example, if you
select the System function, you can simply press the
[SYSTEM] button as many times as necessary to access the
System function page you want.
POPUP TIME
PC=off OTHERS= 3
The name of each page, as well as the accessible parameters
within it, appears in the LCD screen as you step through the
pages.

EDITING PARAMETERS

Note that some pages contain several parameters, which you
can access with the cursor buttons. (See asterisk* items on
the Edit Menu Tree, page 49.)
1. If necessary, press the [1] or [q] buttons to
position the cursor over the desired parameter.
The currently selected parameter will blink on and off in
the LCD screen.
POPUP TIME
PC=off OTHERS= 3
50
1
PIANO 1
SYSTEM
%
440.0Hz
MIDI
PAGE
*
SPLIT TRANSPOSE
BALANCE DETUNE
*