What's In The Box; Headphones Operation - i.am+ IAM5110 User Manual

What's in the Box.

DOTS by i.am+ Bluetooth Headphones
l
Micro USB charging cable.
l
Quick Start Guide
l
User Guide
l
Warranty
l
Headphones operation
Item Requirement and Description
Power On/Off
l Power On: Press and hold the Function button for 3 seconds. (release the
l Power Off: Press and hold the Function button until the red LED light up. Red
Pairing
l First paring: Press and hold Function button for 3 sec. to power on, earphones
l To paring with your PULS or phone, go to settings on your PULS or phone,
l The ear-phones appears as "DOTS by i.am+" Select to pair.
l Bluetooth pairing after a successful first pairing:
l Set up use of DOTS headphones with multiple devices such as your PULS and
button after the blue LED bright, the red LED and blue LED start flashing means
the device enter pairing mode)
LED turn off means the device power off
auto-enter pairing mode - LED alternates flashing Red and White.
make sure Bluetooth is switched on.
n Power off then Press and hold Function button for 5 sec. to place earphones
in pairing mode - LED alternates flashing Red and White, mobile phone
search the Bluetooth device to connect the headphones (headphones ID is
" DOTS by i.am+ "
n If the earphones are outside Bluetooth range and disconnect from PULS or
your phone, the headphones will automatically try to re-connect. If
reconnection is unsuccessful for more than 5 mins, the headset will power
off.
your smartphone.