Download Print this page

Advertisement

Quick Links

USER GUIDE
IMBT25 Bluetooth Headphones
Visit iamplus.com for support.
English User guide
Warning letter:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The statements should be displayed in the user manual:
changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.

Advertisement

loading

Summary of Contents for i.am+ IMBT25

  • Page 1 USER GUIDE IMBT25 Bluetooth Headphones Visit iamplus.com for support. English User guide Warning letter: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 4: What's In The Box

    What’s in the Box. I.AM+ BT Earphones  Micro USB charging cable.  Quick Start Guide  User Guide  Warranty  Headphones operation Item Requirement and Description  Power On: Press and hold the multifunction button for 3 seconds. (release the Power On/Off button after the white LED bright, the red LED and white LED start flashing means the device enter pairing mode)
  • Page 5: Using Voice Command

    3. Search and pair the headset to device 2 4. Turn on Bluetooth on device 1 and connect to earphones Charging Open USB door on controller and connect micro USB cable Using voice Hold volume down for 3 seconds to activate. command Indication ...
  • Page 6 mode once time Reject Incoming call Press and hold multifunction incoming call button for 2 seconds Hang During phone ‘Beep’ sound Press multifunction button 1 phone call call one time time Switch call During phone Double press multifunction between call button headset phone...
  • Page 7 IMBT25 Bluetooth Headphones Specification: Up to 7hrs use time Micro USB charging Ip54 water resistance. Frequency Response 20 ~ 20K Hz Sensitivity 107 dB/mW at 1KHz Impedance 32 Ohm 
 Speaker driver 11mm Magnet type NdFeB Distortion <1% at 1KHz...