Page 1
USER GUIDE DOTS by i.am+ Bluetooth Headphones IAM5110 Visit PULS.com for support. English User guide Warning letter: This device complies with Part 15 of the FCC Rules.
Page 2
Button Power On 0 忏/ Pairing • Function Button Button indicator Micro USB(only for charging) door Microphone ...
What’s in the Box. DOTS by i.am+ Bluetooth Headphones Micro USB charging cable. Quick Start Guide User Guide Warranty Headphones operation Item Requirement and Description Power On/Off l Power On: Press and hold the Function button for 3 seconds. (release the button after the blue LED bright, the red LED and blue LED start flashing means the device enter pairing mode) ...
Page 4
1. Pair headphones to PULS or phone 1 2. Turn off the Bluetooth on PULS phone 1, and turn on Bluetooth on phone 2 3. Search and pair the headset to phone 2 4. Turn on Bluetooth on PULS phone 1 and connect to headset Open USB door “6”...
Page 5
Phone call Answer call Incoming call ‘Beep’ sound Press Function button 1 time once mode Reject Incoming call Press and hold Function button incoming call for 2 seconds Hang During phone ‘Beep’ sound Press Function button 1 time phone call call one time Switch...
Page 6
DOTS by i.am+ Bluetooth Headphones Specification: AptX for enhanced audio quality with PULS and compatible devices. Up to 6hrs use time Micro USB charging Ip54 water resistance. Frequency Response 20 ~ 20K Hz Sensitivity 107 dB/mW at 1KHz Impedance 32 Ohm Speaker driver...
Page 7
§ 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. §...