Dell UltraSharp U2515HX User Manual page 9

Back View
Label
1
VESA mounting holes (100 mm x 100
mm - behind attached VESA Cover)
2 Regulatory label
3 Stand release button
4
Security lock slot
5 Barcode serial number label
6 USB downstream port*
7
Cable management slot
* It is recommended to use this port for your wireless USB device whenever possible.
Description
Back View with monitor stand
Use
Wall mount monitor using VESA-
compatible wall mount kit (100 mm x
100 mm).
Lists the regulatory approvals.
Releases stand from monitor.
Secures monitor with security lock
(security lock not included).
Refer to this label if you need to
contact Dell for technical support.
Connects your USB device. You can
only use this connector after you
have connected the USB cable to
the computer and USB upstream
connector on the monitor.
Uses to organize cables by placing
them through the slot.
About Your Monitor
9
|