B) Monitor fails to show any content (blank screen)
1. Use the
and
2. Press and hold the
3. The DisplayPort configuration message will appear:
Dell UltraSharp U2515H
DP 1.2?
4. Use the
button to enable DP1.2 or
changes.
Repeat the above steps to change the setting back to DP 1.1a if necessary.
CAUTION: The graphics are used for the purpose of illustration only.
Appearance of the computer may vary.
28
|
Setting Up the Monitor
button to highlight DP or mDP.
DP
mDP
button for approximately 8 seconds.
Enable
Disable
button to exit without making any