Table of Contents
Advertisement
DP 1.2
Reset Display
Settings
Energy
Power Button
LED
USB
Reset Energy
Settings
42
|
Operating the Monitor
to enable or disable DP 1.2.
Press
To use the DP MST (Daisy Chain) or HBR2 feature, enable
DP 1.2.
NOTE: Ensure your Graphics Card can support these
features before selecting DP 1.2. Wrong setting may result
in blank screen. Some Graphics Cards do not support
MCCS (Monitor Control Command Set) at DP 1.2. In these
cases, DDM (Dell Display Manager) may not run.
Select this option to restore default display settings.
Dell UltraSharp U2515H
Brightness / Contrast
Input Source
Color
Display
Energy
Menu
Personalize
Other
Resolution: 1920x1080, 60Hz
Allows you to set the power LED indicator On During
Active or Off During Active to save energy.
Allows you to enable or disable USB function during
monitor standby mode.
NOTE: USB on/off under standby mode is only available
when the USB upstream cable is unplugged. This option
will be greyed out when the USB upstream cable plugs in.
Select this option to restore default Energy Settings.
Power Button LED
USB
Reset Energy Settings
Energy Use
On During Active
O During Standby
Maximum: 2560x1440, 60Hz
Advertisement
Table of Contents
