Moving The Appliance - LG LSXS26326 Series Owner's Manual

Disassembling/Assembling the
water lines
Tube
Insert lines
4
Reconnect the water lines by inserting
them into the connectors. The water lines
are inserted correctly when only one of the
two guidelines remains visible.
(Correct)
NOTE
• Water hoses should be cut leaving a clean and
straight edge to avoid losses.
5
Reconnect all of the wire harnesses.
6
Reconnect the ground wire.
7
Hook the tab on the switch side of the
cover under the edge of the wire opening in
the cabinet top. Position the cover in place.
Insert and tighten the cover screw.
Reinstalling the right (Refrigerator)
Door
1
Position the door from the bottom pin of
the hinge.
Bottom hinge
Collet
Tube
(Incorrect)
2
Place the top hinge
hinge lever and place it instead. Rotate the
lever in direction counter clockwise and
secure the hinge.
3
Reconnect all harnesses. Hook the tab on
the side switch of the lid, under the edge of
the opening in the top of the cabinet. Place
the lid and replace screw.

Moving the Appliance

1
Remove all food from inside the appliance.
2
Pull the power plug out, insert and fix it into
the power plug hook at the rear or on top of
the appliance.
3
Tape parts such as shelves and the door
handle to prevent from falling off while
moving the appliance.
4
Move the appliance with more than two
people carefully. When transporting the
appliance over a long distance, keep the
appliance upright.
5
After installing the appliance, connect the
power plug into a socket out to switch on the
appliance.
INSTALLATION 17
above the latch the