Vivotek IP9164-HT User Manual page 209

© 2019 VIVOTEK INC. All Right Reserved
NAME VALUE
enablewaterm 0, 1
ark
<product
dependent>
s<0~(m-2)>_fis '1O, 1P, 2P, 1R, 4R' for
heyedewarpm ceiling/floor mount
ode '1O, 1P, 1R, 4R' for wall
<product mount
dependent> <product dependent>
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h264_smartstream2
and capability_smartstream_version>=2.0)
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h265_smartstream2
capability_smartstream_version>=2.0 and h265 is listed in "capability_videoin_codec")
n denotes the value of "capability_nvideoin",m denotes the value of " capability_nmediastream"
NAME VALUE
enable <boolean>
mode autotracking,manual,hybri
d
SECURITY( DESCRIPTION
get/set)
"capability_videoin_c<0~(n-1)>_moun
ttype" != "-".
1/6 0: Not to add watermarks on images
1: Add watermarks on images
* Only available when
"capability_fisheye" > 0
1/4 Local dewarp mode.
"1O" is original mode (disable).
Supported dewarp mode is different
by mount type.
(videoin_c<0~(n-1)>_mounttype)
Supported mode list could be
extracted from
(capability_videoin_c<0~(n-1)>_locald
ewarp_typeceilingmount) and
(capability_videoin_c<0~(n-1)>_locald
ewarp_typewallmount)
* Only available when
"capability_fisheyelocaldewarp_c<0~(
capability_nvideoin)-1>" > 0
(capability_smartstream_support=1
(capability_smartstream_support=1,
SECURITY DESCRIPTION
(get/set)
4/4 Enable or Disable smart codec
function
4/4 Set Smart stream mode
"autotracking": only available when
"capability_smartstream_mode_autot
racking" is 1.
"manual": only available when
"capability_smartstream_mode_man
VIVOTEK
75
User's Manual - 209