Vivotek IP9164-HT User Manual page 201

© 2019 VIVOTEK INC. All Right Reserved
NAME VALUE
nt
s<0~(m-1)>_h2 20000~"capability_videoin
64_bitrate _c<0~(n-1)>_h264_maxbit
rate"
s<0~(m-1)>_h2 framerate,imagequality
64_prioritypoli
cy
s<0~(m-1)>_h2 1~"capability_videoin_c<0
64_maxframe ~(n-1)>_h264_maxframera
te"
s<0~(m-1)>_h2 0~2
64_profile
s<0~(m-1)>_h2 <boolean>
64_smartq_en
able
s<0~(m-1)>_h2 <boolean>
65_dintraperio
d_enable
SECURITY( DESCRIPTION
get/set)
1: Worst quality
100: Best quality
* Only valid when
"h264_ratecontrolmode"= cbr and
"quant"= 100.
4/4 The target bit rate in constant bit rate
mode.
* Only valid when
"h264_ratecontrolmode"= cbr
4/4 Set prioritypolicy
* Only valid when
"h264_ratecontrolmode"= cbr
1/4 The maximum frame rates of a H264
stream at different
resolutions("capability_videoin_c<0~(
n-1)>_resolution") are recorded in
"capability_videoin_c<0~(n-1)>_h264
_maxframerate"
1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile
4/4 Enable "Smart Q" function.
* Only available when
"capability_videoin_c<0~(n-1)>_smart
q_support" is 1.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0309a.
4/4 Enable "Dynamic intra frame period".
* Only available when
"capability_videoin_c<0~(n-1)>_dintra
period_support" is 1 and h265 is listed
in "capability_videoin_codec".
* We support this parameter when
the version number (httpversion) is
VIVOTEK
67
User's Manual - 201