Restart/Shutdown; Calibrate Touch Screen - Honeywell Thor VM2W User Manual

Rev. (a)

Restart/Shutdown

Use the Windows interface to restart or shut down the Thor VM2W.
Tap Start > Shut Down > Restart
l
Tap Start > Shut Down > Shut down
l

Calibrate Touch Screen

To calibrate the touch screen, access the touch screen software. Select:
Tap Start > Programs > PenMount Universal Driver > Utility > PenMount Control Panel. Select PenMount 6000
l
USB and then tap Configure. Select Standard Calibration or Advance Calibration. Advanced Calibration allows the
user to select the number of calibration points. With either option, follow the on screen instructions to touch the red
square, hold the touch and then lift the stylus to complete the calibration process.
2-14