Logging in to the Web Configuration Window
Step 1 Set the IP address of the PC in the same subnet as the management
IP address of the GPON terminal.
NOTE
You can find the default management IP address on the nameplate
of the device.
Step 2 Enter the management IP address of the GPON terminal in the
address bar of Internet Explorer and press Enter.
The login window is displayed.
Step 3 In the login window, select your preferred language, enter the user
name and password (printed on the nameplate of the device.),and
click Login. After the password is authenticated, the Web
configuration window is displayed.
NOTE
-If you do not perform any operations after logging in to the
system for five minutes, you will exit the system and the system
automatically returns to the login interface.
-The system will be locked if you input incorrect user name and
password three consecutive times. One minute later, it will be
unlocked.
-Change the initial password after logging in to the web page.
7