Table of Contents
Advertisement
USB-C
Use the Thunderbolt 3 connector to connect your computer to a wired display. Depending on the types of
connector that the display supports, you may need to purchase and use one of the following adapters or
cables.
• USB-C to DisplayPort
• USB-C to HDMI
• USB-C to DVI
• USB-C to VGA
• USB-C to USB-C
Read the documentation for your display before purchasing an adapter or cable.
Step 1.
Plug the USB-C adapter or cable into the Thunderbolt 3 connector on your computer.
Step 2.
(Optional) If you are using an adapter, plug the video cable into the appropriate connector on the
adapter.
Step 3.
Plug the other end of the cable into the appropriate connector on the display.
Connect to a wireless display device
You can connect your computer to an external display through Miracast.
Note: The display device may support Miracast directly or may use an adapter that supports Miracast.
Step 1.
In Windows 10, select Start ➙ Settings ➙ Devices.
Step 2.
Select Add Bluetooth or other device ➙ Wireless display or dock.
Step 3.
Select the device name to connect to.
Notes: If the device name is not displayed, check to ensure that
• Wi-Fi is turned on for your computer.
• the display device is turned on and is near your computer.
The Novo Button menu
The Novo Button menu can be displayed before the operating system starts. From the menu, you can
choose to
• Open the BIOS/UEFI setup utility
• Open the boot device selection menu
• Open the Windows startup options screen
Note: From the Windows startup options screen, you can then choose to
Start your computer using a recovery drive
Reset your computer
Open advanced options screen
Open the Novo Button menu
For Lenovo computers with a Novo button, you can press the button to open the Novo Button menu.
Step 1.
Turn off the computer.
16
User Guide
Advertisement
Table of Contents
