Modifying Control Options - hager SC900AX Manual

G
Handset display
in standby mode
RADIO LINK
HANDSET
ACCESS
Menu
NIGHT ACTIVE
MODE INACTIVE
Factory:
INACTIVE
STRIKE INACTIVE
SOUND LOW
HIGH
Factory: LOW

11.6 Modifying control options

Handset display
in standby mode
RADIO LINK
HANDSET
ACCESS
Menu
AUTO
COMMAND
KEYPAD
ELECTRIC
STRIKE
GATE
Factory:
ELECTRIC STRIKE
136
Setting
possible
Can be used to lower the volume of a button when it is pressed
or of ringing on the outdoor caller unit (the volume is lowered to
QUIET).
IMPORTANT: the NIGHT MODE menu is only displayed if the doorphone
system has been fitted with an MHF01X or MHF02X caller unit.
Can be used to disable or adjust the volume on the outdoor
caller unit when an electrical latch is operated.
Setting
possible
Can be used to define the command issued when a tag is
detected or a code entered.
When a tag is used or a code entered, the system waits for the
or
control system.
IMPORTANT: the KEY setting is only displayed if the doorphone system
has been fitted with an outdoor caller unit with keypad.
Latch opening (or side gate opening or closing if no latch is
connected) will be directly triggered when a tag is used or a
code entered rendering it unnecessary to press
Gate opening or closing will be directly triggered when a tag is
used or a code entered rendering it unnecessary to press
TAGS
PIN
DISPLAY
SOUNDS
PARAMETERS
PULSE
INFOS
Using the setting
TAGS
PIN
DISPLAY
SOUNDS
PARAMETERS
PULSE
INFOS
Using the setting
key to be pressed in order to open a latch or a gate
VOLUMES
NIGHT MODE
STRIKE SOUND
AUTO COMMAND
.
.