Digital Audio Output - Yamaha DVD-S796 Operating Instructions Manual

Changing initial settings

7 Digital Audio Output

See page 28 for operation.
Digital Audio Output
1 PCM Down Conversion
2 Dolby Digital
3 DTS Digital Surround
Press RETURN to exit
32
1 PCM Down
Conversion
No
Select whether to output
audio on DVD recorded in
Bitstream
96 kHz linear PCM as it is
Off
(No) or to convert it to
48 kHz for output (Yes).
2 Dolby Digital
To select the signal format
(Bitstream or PCM) to be
output from the optical
digital audio output
terminal during playback of
DVDs recorded in Dolby
Digital.
3 DTS Digital Surround
To select whether DTS
Digital Surround bitstream
is output from the optical
digital audio output
terminal or no digital audio
is output during playback
of DVDs recorded in DTS
Digital Surround.
1 No (Factory preset)
When playing a DVD recorded in 96 kHz linear PCM, signal
1
of 96 kHz/24 bit sampling frequency will be output and you
can enjoy high quality sound. If the DVD is copyright-
protected, no digital signal will be output unless converted to
48 kHz.
Signal of 48 kHz linear PCM can be output from digital
audio output terminal irrespective of the setting.
2 Yes
When playing a DVD recorded in 96 kHz linear PCM, signal
is converted to 48 kHz/16 bit and can be output from digital
audio output terminal even if the DVD is copyright-protected.
1 Bitstream
Dolby Digital bitstream (1ch–5.1ch) is output during playback
of DVDs recorded in Dolby Digital.
2 PCM
Digital audio converted to 48 kHz/16 bit PCM (2ch) is output
during playback of DVDs recorded in Dolby Digital.
1 Off (Factory preset)
No digital audio is output during playback of DVDs recorded
in DTS Digital Surround.
2 Bitstream
DTS Digital Surround bitstream (1ch–5.1ch) is output during
playback of DVDs recorded in DTS Digital Surround.
(Factory preset)
2
2