AT&T CL80067 User Manual page 13

Getting started
Battery installation and charging
After you install your telephone or power returns
following a power outage, the handset will prompt
you to set the date and time.
After that, it will prompt if you want to set up
Smart call blocker* and the answering system via
voice guides (only for CL82107/CL82207/CL82257/
CL82267/CL82307/CL82357/CL82367/CL82407/
CL82467/CL82507/CL82547/CL82557 telephone
system). Press
prompted. For details, see the corresponding
sections in the telephone system's user's manual.
To skip these settings, press
IMPORTANT INFORMATION
1. Use only the supplied rechargeable battery or replacement battery
(model BT183342/BT283342). To order, visit our website at
https://telephones.att.com
In Canada, dial
2. If you do not use the handset for a long time, disconnect and remove
the battery to prevent possible leakage.
* Includes licenced Qaltel
Qaltel is a trademark of Truecall Group Limited.
TM
To replace the battery, press the tab and
slide the battery compartment cover
downwards. Lift out the old battery and
disconnect it from the handset. Follow
the instructions to install and charge a
new battery.
/SELECT to start when
MENU
1 (866) 288-4268
technology.
TM
/CANCEL.
OFF
or call
.
9
SET DATE
MM/DD/YY
SET TIME
HH:MM --
Setup Ans sys?
1 (800) 222-3111
.