Table of Contents
Advertisement
Initial settings
Once the intial settings have been completed, the player can
always be operated under the same conditions (especially
with DVD discs).
The settings will be retained in the memory even after switch-
ing the power to the standby mode until the settings are
changed.
Common procedures of initial settings
1
Press SET UP in the stop mode.
2
Press
/
to select the preferred item and
SELECT.
Each screen for setting the value is displayed.
1 Disc Languages (see page 32)
2 Ratings (see page 33)
3 Menu Language (see page 34)
4 On-Screen Messages (see page 35)
5 FL Display (see page 35)
6 TV Aspect (see page 36)
7 Digital Audio Output (see page 37)
8 Speaker setting (see page 39)
9 Other Settings (see page 41)
3
Press
/
to select the preferred value
and press SELECT.
ÁSome items require additional steps. (See the respec-
tive page.)
Setting is finished and the initial settings screen is displayed.
To cancel during setup operation
Press RETURN or select "0". (The previous screen is dis-
played.)
To clear the initial settings screen
Press
to select "0" and press SELECT. (Pressing SET UP
or RETURN also clears the initial settings screen.)
For your reference:
ÁThe numeric buttons can also be used for selecting items or
values instead of
/ ; in this case, pressing SELECT is
not necessary.
1 Disc Languages
2 Ratings
Level 8
3 Menu Language
English
4 On-Screen Messages
On
5 FL Display
Bright
6 TV Aspect
4:3
7 Digital Audio Output
8 Speaker Setting
9 Other Settings
0 Exit
POWER
OPEN/CLOSE
*/ I
@STOP
DPLAY
gSTILL/PAUSE
SLOW/
H
SKIP
I
F
SEARCH
TITLE
MENU
SELECT
ON SCREEN
RETURN
SUBTITLE
AUDIO
ANGLE
MARKER
PLAY MODE
REPEAT
A-B
CLEAR
SET UP
DVD
1
SET UP
2 ·
3
SELECT
G
RETURN
31
Advertisement
Table of Contents
