Ejecting The Disc - Yamaha CRW4261t-NB User Manual

Chapter 3 - Operation

Ejecting the Disc

If the CRW4261t is powered on:
Press the eject button to eject the disc.
Note: You cannot eject the disc if the ATAPI command prohibits the eject
operation while the CRW4261t is reading data.
Caution: Be sure to remove the disc after it is completely ejected. (Trying to
remove the disc before it is completely ejected may cause the drive to
malfunction.)
If the CRW4261t is not powered on:
Pressing the eject button will not eject the disc.
14
Press the eject button