Tools; Discs - Yamaha CDR400At User Manual

Chapter 1 - System Configuration

Tools

•
This is used to remove the
cover of your computer, and to install the Yamaha CDR400At drive.
•
These are used to insert or remove the
jumper pin when setting the SCSI ID
and parity settings etc.of the Yamaha
CDR400At drive.

Discs

CD-R Discs
On the CDR400At, you can use conventional CD-R discs that conform
to the Recordable Compact Disc Systems Part 2 (Orange Book).
Yamaha recommends the following Yamaha CD-R discs:
> CDM12Y63
> CDM12Y74
> CDM12Y74M ( 120mm, 74 minutes)
> CDM12Y74T ( 120mm, 74 minutes)
Read-only Discs
You can use discs with the
Disc Read Only Memory standard (CD-ROM standard, Yellow Book).
If you wish to use the audio functions, use discs with the
which conform to the Compact Disc Digital Audio standard (Red Book).
4
Phillips screwdriver
Long nose pliers
( 120mm, 63 minutes)
( 120mm, 74 minutes)
logo which conform to the Compact
logo,