Setting The System - Sherwood R-672 Operating Instructions Manual

R-672(A) 2007.6.15 10:17 AM 페이지 37

SETTING THE SYSTEM

• AMP (AMP ASSIGN) : To assign the power amplifier to the surround back left and right channels or the surround back and
• SW (SUBWOOFER) : To select the desired subwoofer mode.
• TONE : To adjust the tone (bass and treble) as desired.
• C-EQ (CINEMA EQ) : To select the desired cinema EQ mode.
• RETURN : To return to the previous menu.
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons to
select the desired item.
When selecting the AMP ASSIGN
• When connecting one surround back speaker and the subwoofer without built-in amplifier to the SURROUND BACK LEFT and
RIGHT channels respectively, you should assign the power amplifier to "SB+W" (Surround Back+Subwoofer). (For details on
speaker connection, refer to "CONNECTING SPEAKERS" on page 9.)
SB (Surround Back) : To assign the power amplifier to the surround back left and right channels.
SB+W (Surround Back+Subwoofer) : To assign it to the surround back and the subwoofer channels.
When selecting the SUBWOOFER mode
• "SW ＋" mode is valid only when "FRONT" and "CENTER" are set to "L" and "SUB-W" is set to "Y" on the SPEAKER SETUP
menu. (For details, refer to "SETTING THE SPEAKER SETUP" on page 41.)
NORM : When the low frequency signals of channels set to "L" are reproduced from those channels only.
In this mode, the low frequency signals that are reproduced from the subwoofer channel is only the low frequency
signals of LFE (from the multi-channel sources that contains LFE (Low Frequency Effects) channel, also called the ".1"
channel) and the channels set to "S".
SW ＋ : When the low frequency signals of channels set to "L" are reproduced simultaneously from those channels and the
subwoofer channel.
In this mode, the low frequency range expands more uniformly through the room, but depending on the size and shape
of the room, interference may result in a decrease of the actual volume of the low frequency range.
the subwoofer channels.
2.
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to
set the selected item as desired.
37