PROCEDURE FOR TAKING OFF THE LCD PANEL
Removal of the Back Cover
Open the lid cover holding the AC Power Code.
Release the AC Power Code from the wire band inside the lid cover.
Remove the Back Cover.
Fig.1 Removal of the Back Cover
Removal of the PCBs
Take off the two Speaker Assy's from the chassis, and disconnect the speaker cable from
Main PCB.
Take off the Touch Sensor from the chassis, and disconnect the lead wire from RMT PCB.
(Touch sensor is fitted by adhesive tape under the speaker at the right side of the TV)
Disconnect all the wires from the PCBs, and remove the PCBs.