Exit From Service Mode - Toshiba 40WL768 Service Manual

Exit from Service Mode

Pressing POWER button to turn off the TV once.
Initialization of TV Micro Data
After replacing Digital Board, the following initialization is required.
1) Enter Service Mode.
2) Select menu of MOID by pressing P
Service Mode.
3) Change MOID data into MODEL ID to initialize by pressing
"MODEL ID TABLE".
For example, if initializing 40WL768, change MODEL ID into "0x41".
Note:
MODEL ID is hex value.
4) Press any button on TV. The white LED turns on.
5) Execute initialization of the memory.
Refer to "KEY FUNCTION IN THE SERVICE MODE".
Press "i+" + P
6) TV is automatically turned off and on after the memory initialization is completed.
7) Enter Service Mode and select Version Check Mode. Confirm if the MODEL ID
corresponding to the model name is set correctly. If not, do over again from the start.
Note:
If the wrong MODEL ID is set, abnormal display might appear.
MODEL ID TABLE
button on TV.
or P during display of adjustment menu in the
+ or -, refer to