Getting Around - AT&T Z812 User Manual

Switching to Sleep Mode
To save battery power, Sleep Mode suspends your phone in a low-power-
consumption state while the display is off. Your phone also goes into Sleep
Mode by itself when the display is automatically turned off after a certain
period of time, which you can set by tapping
Sleep from the home screen.
Press the Power Key to switch to Sleep Mode.
Waking Up Your Phone
①Press the Power Key to activate your screen display.
②Tap and hold a blank area to unlock the screen.
Note: If you have set an unlock pattern, PIN, or password for your phone
Settings – Security
(see
PIN/password to unlock your screen.

Getting Around

Touch Control
Use the touchscreen to control your phone. The controls on your
touchscreen change dynamically depending on the tasks you're
18
) you'll need to draw the pattern or enter the
> Settings > Display >
Phone Setup