Product Features; Local Codes; Unpacking - HearthSense MO18HVL Manual

ON/OFF SAFETY PILOT VALVE KIT WITH PROPANE CONVERSION
An optional on/off valve/safety pilot kit, Model NVDWA2, is available to convert this appliance
for use with propane gas. This system requires no matches, batteries, or other sources to
light. Follow the instructions provided with the kit to complete the conversion and qualified
connection to a propane gas supply, See Check Gas Type under INSTALLATION, on page 6.
Install and use heater with care. Follow all
local codes. In the absence of local codes,
use the latest edition of The National Fuel
Gas Code, ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
1 Batterymarch Park
Quincy, MA 02269-9101
CAUTION: Do not remove the
metal data plates from the burner
pan. The data plates contain
important product information.
1. Remove logs, hearth kit, pan materials,
and hardware from carton.
2. Remove all protective packaging applied
to logs and base for shipment.
3. Check all items for any shipping damage.
If damaged, promptly inform dealer where
you bought the product.
200549-06B

PRODUCT FEATURES

LOCAL CODES

UNPACKING

Grate
HearthSense
State of Massachusetts: The installation
must be made by a licensed plumber or
gas fitter in the Commonwealth of Mas-
sachusetts.
Sellers of unvented propane or natural
gas-fired supplemental room heaters shall
provide to each purchaser a copy of 527
CMR 30 upon sale of the unit.
In the State of Massachusetts the gas
cock must be a T-handle type. The State
of Massachusetts requires that a flexible
appliance connector cannot exceed three
feet in length.
Burner
Pan
Burner
Clamp
Burner
Manifold
Figure 1 - Product Identification
Grate Steps
Burner Inlet
Fitting
5