Table of Contents
Advertisement
treat heavily soiled or stained laundry
with stain remover.
Pour the stain remover into
compartment
will be added in the appropriate
phase of the washing programme.
This option is not
available with a
temperature lower than
40 °C.
• Prewash
Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
The options can increase the
programme duration.
6.7 Delay Start
With this option you can delay the start
of a programme in a more convenient
time.
Tap on the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After starting the cycle by the means of
the Start/Pause button, the display shows
the selected delay time and the
appliance begins the countdown.
6.8 Time Save
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button once to decrease the duration.
• In case of smaller load, touch this
button twice to set an extra quick
programme.
On the display the programme duration
is adjusted accordingly.
When this button is set, the led above
the button is on.
. The stain remover
This option can also be used
to shorten the Steam
programme duration.
6.9 Timed drying
Touch this button to set the time that
suits the fabrics you have to dry (refer to
"Timed drying" table). The display shows
the set value.
Each time you touch this button the time
value increases by 5 minutes.
You cannot set all time
values for different types of
fabrics.
6.10 Drying Levels
Touch this button to set one of 3
automatic dryness levels proposed by
the appliance.
On the display the relevant dryness
indicator goes on:
•
Iron dry: laundry to be
ironed.
•
Cupboard dry: laundry to be
put in store.
•
Extra dry: laundry to be
fully dried.
You can not set all
automatic levels for each
type of fabrics.
6.11 Mode
Thanks to this button, a cycle can
perform:
• Only washing
on.
• Washing and drying
and Dry indicators are on.
• Only drying
: Dry indicator is on.
6.12 Start/Pause
Touch the Start/Pause button to start,
pause the appliance or interrupt a
running programme.
ENGLISH
15
: Wash indicator is
: Wash
Advertisement
Table of Contents
