AEG L61472WDBI User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer/Dryer
  5. L61472WDBI
  6. User manual

AEG L61472WDBI User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
L61472WDBI
USER
MANUAL
EN
User Manual
Washer Dryer

Advertisement

Table of Contents
loading

Related Manuals for AEG L61472WDBI

Summary of Contents for AEG L61472WDBI

  • Page 1 L61472WDBI User Manual Washer Dryer USER MANUAL...

  • Page 2: Table Of Contents

    17. TECHNICAL DATA....................37 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4 The appliance shall be installed as a freestanding • product or below the kitchen worktop if space margins permit. Do not install the appliance behind a lockable door, a • sliding door or a door with a hinge on the opposite side, that would prevent the appliance door from being fully open.
  • Page 5 ENGLISH Items that have been soiled with substances such as • vegetable or mineral oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed separately with an extra amount of detergent before being dried in the washer dryer.

  • Page 6: Safety Instructions

    2. SAFETY INSTRUCTIONS 2.1 Installation • Do not pull the mains cable to disconnect the appliance. Always pull The installation must comply the mains plug. with relevant national • Do not touch the mains cable or the regulations. mains plug with wet hands.

  • Page 7: Product Description

    ENGLISH – If a detergent ball is used, remove • Cut off the mains electrical cable it before starting a drying close to the appliance and dispose of programme. – Do not use a detergent ball if • Remove the door catch to prevent setting a non-stop programme.
  • Page 8 3.2 Accessories Spanner To remove the transit bolts. Plastic caps To close the holes on the rear side of the cabinet after the removal of the transit bolts. Inlet Hose To connect the appliance to the water tap. Plastic hose guide To connect the drain hose on the edge of a sink.

  • Page 9: Control Panel

    ENGLISH 4. CONTROL PANEL 4.1 Control panel description Delay Start Economy Cottons Refresh Drying 1400 40 E Cottons Dry 1200 Synthetics Dry Washing Spin Drying Drain + Prewash Door Delicate Rinse Cold Wool/ Extra Drying Time Save Spin Stains Start/Pause Silk Rinse Time...
  • Page 10 Duration of the set programme When you set a programme, the display shows the duration in hours and minutes (for example 2.05). The duration is calculated automatically on the maximum load for each type of fabric. After the programme has started, the time remaining is updated every mi- nute.

  • Page 11: Programmes

    ENGLISH 4.3 Phase indicators After you have pressed the button Start/Pause, the Washing (A) indicator comes on. The appliance is operating. When you set a drying programme, the Drying (B) indicator illuminates and stays on during the drying phase. The Door (C) indicator indicates when the door can be opened: •...
  • Page 12 Programme Maximum load Programme description Temperature range Maximum spin (Type of load and soil level) speed To rinse and spin the laundry. All fab- 3 kg rics, except woollens and very delicate 1200 rpm Delicate Rinse fabrics. Reduce the spin speed accord- Cold ingly to the type of laundry.
  • Page 13 ENGLISH Programme Time Extra Spin Delay Start Stains Rinse Save ■ ■ ■ ■ ■ ■ Synthetics ■ ■ ■ ■ Easy Iron ■ ■ ■ ■ ■ ■ Delicates ■ ■ ■ Wool/Silk ■ ■ ■ ■ Delicate Rinse Drain ■...

  • Page 14: Consumption Values

    Dryness Level Type of fabric Load Spin Suggested (kg) speed duration (rpm) (mins) Iron Dry Cottons and Linen 1400 140 - 150 Suitable for ironing (sheets, tablecloths, shirts, 1400 90 - 100 etc) 1400 60 - 70 1) Hints for test institute. The test performance, in accordance with EN 50229:2015, must be carried out with a FIRST drying load of the maximum declared drying capacity by setting 200 minutes by means of the Drying Time button for the Cottons Dry programme.

  • Page 15: Settings

    ENGLISH • Set this option to prevent the laundry • Press this button one time to set creases. 'Shortened duration' for items with • The relevant indicator comes on. daily soil. • The washing programme stops with • Press this button two times to set the water in the drum.

  • Page 16: Before First Use

    9. BEFORE FIRST USE 1. Connect the mains plug to the mains 5. Set and start a programme for cotton socket. at the highest temperature without 2. Open the water tap. laundry. 3. Put 2 litre of water in the detergent This removes all possible dirt from the compartment for washing phase.
  • Page 17 ENGLISH The programme dial can be turned You can modify or cancel the delay time either clockwise or anticlockwise. at any moment, before you press button Start/Pause. Off = Reset programme/switching OFF of the appliance The door will be locked throughout the delay time.

  • Page 18: Daily Use - Drying Only

    10.7 Interrupting a again. Press button Start/Pause to start the programme again. programme 10.10 At the end of the Press Start/Pause button to interrupt a programme which is running, the programme corresponding indicator starts flashing. The appliance stops automatically. The...

  • Page 19: Daily Use - Washing & Drying

    ENGLISH 11.1 Drying setting • The indicator is on. If you set only 10 minutes of The recommended load size drying, the appliance is 4 kg for cottons and linen, performs only a cooling and 2 kg for synthetic items. phase.

  • Page 20: Hints And Tips

    For more information see 'At the end of To have a good drying the drying programme " of the previous performance do not exceed chapter. the maximum drying loads recommended in the user 1. Turn the selector dial to the position manual.
  • Page 21 ENGLISH 13.4 Ecological hints • Be careful with the curtains. Remove the hooks and put the curtains in a • Set a programme without the washing bag or pillowcase. prewash phase to wash laundry with • Do not wash laundry without hems or normal soil.

  • Page 22: Care And Cleaning

    13.10 Additional drying • Fabrics with residue of hair sprays, nail solvents or similar. If, at the end of the drying programme, • Garments with foam-rubber or the laundry is still damp, set a short materials similar to foam-rubber.
  • Page 23 ENGLISH Regularly examine the seal and remove all objects from the inner part. 14.5 Cleaning the detergent dispenser 14.6 Cleaning the drain filter The pump should be inspected regularly and particularly if: • The appliance does not empty and/or spin. •...
  • Page 24 1. Unplug the appliance. 2. If it is necessary, wait until the water has cooled down. 3. Place a container close to the pump to collect any spillage. A = Cover filter. B = Emergency emptying hose. 4. Release the emergency emptying hose, place it in the container and remove its cap cover.
  • Page 25 ENGLISH 8. Put the cap back on the emergency emptying hose and place the latter back in its seat. Replace the filter into the pump by inserting it correctly into the special guides. Screw the filter cover firmly by turning it clockwise.

  • Page 26: Troubleshooting

    WARNING! Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. 15. TROUBLESHOOTING • - The appliance door is open or WARNING! not closed correctly.
  • Page 27 ENGLISH Problem Possible solution The appliance does not • Make sure that the sink spigot is not clogged. drain the water. • Make sure that the drain hose has no kinks or bends. • Make sure that the drain hose is in the correct position. The hose may be too low.

  • Page 28: Installation

    Problem Possible solution The laundry is full of dif- The fabrics washed in the previous cycle released fluff of a dif- ferent coloured fluff: ferent colour. • Clean the clothes with a fluff remover • The drying phase helps to eliminate some fluff.
  • Page 29 ENGLISH Remove the cardboard top. Remove the polystyrene packaging materials. Remove the internal film. Open the door. Remove the polystyrene piece from the door seal and all the items from the drum. Put one of the polystyrene packaging elements on the floor behind the appliance. Carefully put down the appliance with the rear side on it.
  • Page 30 Remove the polystyrene protection from the bottom. Pull up the appliance in vertical position. Remove the polystyrene block fitted on the door seal (if present). Pull out all items from the drum. Remove the power supply cable and the drain hose from the hose holders.
  • Page 31 ENGLISH Put the plastic caps in the holes. You can find these caps in the user manual bag. We recommend that you keep the packaging and the transit bolts for any movements of the appliance. 16.2 Positioning and levelling • Install the appliance on a flat hard floor. •...
  • Page 32 16.3 The inlet hose • Connect the hose to the back appliance. Turn the inlet hose only left or right. • Loose the ring nut to set it in the correct position. • Connect the water inlet hose to the cold water tap with 3/4"...
  • Page 33 ENGLISH On the edge of a sink • Make sure that the plastic guide cannot move when the appliance drains. Attach the guide to the water tap or the wall. To a stand pipe with vent-hole • Directly into a drain pipe at a height of not less than 60 cm (23.6”) and not more than 100 cm (39.3”).
  • Page 34 To a wall-pipe • Directly to a built-in drain pipe in the room wall and tighten it with a clip. You can extend the drain hose to maximum 400 cm. Contact the service centre for the other drain hose and the extension.
  • Page 35 ENGLISH Adjust the anti-tilting device so that the distance from the counter is 10mm. Loosen ~10mm the nut counterclockwise with a 3mm wrench. Adjust the height and turn the nut clockwise to fix it. 16.5 Preparation and assembly of the door The appliance is originally pre set for the assembly of a door opening from right to left.
  • Page 36 Hinges To mount the hinges it is necessary to drill two holes (dia. 35 mm, depth12.5-14 mm depending on the depth of door furniture) on the inner side of the door. The distance between the hole fixing centres must be 416 mm. The distance from upper...

  • Page 37: Technical Data

    ENGLISH 17. TECHNICAL DATA Dimension Width/ Height/ Depth/ 596 mm/ 818 mm/ 544 mm/ 560 mm Total depth Electrical connection Voltage 230-240 V Overall power 2050 W Fuse 13 A Frequency 50 Hz Level of protection against ingress of solid particles IPX4 and moisture ensured by the protective cover, ex- cept where the low voltage equipment has no pro-...
  • Page 38 www.aeg.com...
  • Page 39 ENGLISH...
  • Page 40 www.aeg.com/shop...

Table of Contents