Getting Start; Play/Pause Mode - LENCO SCD-580SI User Manual

Portable radio/cd player with bluetooth and usb
Hide thumbs Also See for SCD-580SI:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Preset stations 
You can store up to 20 radio stations in the memory 
Set to tuner mode. 
1.  Turn to the desired radio station by "Manual" or "Auto" tuning method. 
2.  Press the Mem/Clk‐Adj button (4) once and the "MEMORY" indicator and preset station number is flashing 
on the LCD display (6). 
3.  Press Folder/Pre‐up/down button (15) to select the desired station memory for storage. 
4.  Press Mem/Clk‐Adj button (4) again to confirm the setting. 
5.  Repeat step 1 to 4 to store other stations. 
6.  Now you can select the presets stations in order by pressing the Folder/Pre–up/down button (15) 
 
Please Note:
 
The presets  will  not be  remembered  when the mains power  is  disconnected and  no  batteries  are  inserted.  It's 
best to keep the mains connected all the time. 
When  storing  a  preset,  the  program  mode  will  discard  any  changes  and  return  to  normal  mode  automatically 
after 10 seconds. (When the preset is not stored by pressing Mem/Clk‐Adj (4) within that time). 
 You can overwrite a present station by storing another frequency in its place. 
 
FM‐Stereo reception 
Press the St/Mono button (7) repeatedly, to switch between forced MONO or AUTO mode. In particular when 
stereo signals are weak, it is preferable to receive the program in Mono. 
The  default FM mode  is  configured  as  AUTO,  so when the  Radio stations  are  received  in  stereo,  the  stereo 
indicator "
" will be shown on the LCD display (6). 
 
Hints for best reception:‐ 
The radio is equipped with a telescopic antenna (20). Fully extend the antenna and rotate the antenna to a position with the 
best reception. 
Playing Compact Disc 
Getting start 
1.  Press Function button (13) to select "CD" mode. 
2.  Press the top right corner of the cd door to open. 
3.  Insert a CD with the label facing up and close the cd door. 
4.  The  CD  content  will  be  read  and  the  LCD  display  (6)  will  show  the  total  number  of  tracks  and  the  total 
playtime. Playback will start automatically. 
5.  Press the volume button (16) until the desired volume level is reached. 
Play/Pause mode 
1.  To temporary stop music play, press the Play/Pause 
will freeze. Press the Play/Pause 
 
 
  button (8) again to resume the music play. 
  button (8) once. The playtime on the LCD display (6) 
7

Advertisement

Table of Contents
loading

Table of Contents