LENCO SCD-580SI User Manual page 11

B. Timer setting
This function allows the system to turn on automatically and wake you up by CD, FM or USB mode.
1. Press and hold the Sleep/Timer (14) to enter the timer Settings mode. The LCD display (6) will show "On
Timer" and a clock icon.
2. Press the Timer button (14) again or wait until the "ON TIMER" message disappears. The first two digits of
the clock will flash, the first two digits of clock will flash, Now press Tune
the hour. Press the Timer button (14) again to confirm.
3. Now the last two digits of the clock will flash, press Tune
and Press the Timer button (14) again to confirm.
4. Press the Volume ‐ + (16) button to adjust the wake up volume level and press the Sleep/Timer (14) button to
confirm the volume level.
5. Press the Function button (13) to select the wake up mode. You can choose CD, FM, or USB. Press the
Sleep/Timer button (14) to confirm.
6. On the LCD display "Off Timer" will flash. Press the Sleep/Timer (14) button or wait until the "off timer"
message disappears. The first two digits of the clock will flash.
7. Press Tune or Tune
8. The last two digits of the clock will flash.
9. Press Tune or Tune
confirm.
10. The unit will then turn to standby mode with a clock icon appears on the LCD display.
11. The unit will automatically turn on and off at the preset time with the selected mode and volume level.
Remark:‐
If there is no music source detected (such as USB or CD) at the configured time, the system will use the FM
mode at the last used frequency/Preset.
For Tuner wake up, the system will use the FM mode at the last used frequency/Preset.
There are about 4 seconds for alarm setting mode, this system will return to normal mode automatically if no
keys being pressed in this time frame.
During the alarm on mode, pressing the On/Standby button (2) will switch off the system.
Enable/Disable timer function
1. To active the alarm function, press the TIMER button (14) repeatedly to select "ON" or "OFF". The clock icon
will appear on the LCD display if the function is turned on. Otherwise, the clock icon will be disappeared from
the LCD display.
C. Equalizer (EQ) function
The SCD‐580 comes with 4 differrent sound modes to enhance your listening experience. By pressing the preset
EQ button (9) you can choose the following modes:
button (17) to set the hour. Press the Timer button (14) again to confirm.
button (17) to set the minutes and press the Timer button (14) again to
11
or Tune
or Tune button (17) to set the minutes
button (17) to set