Rapid video mounts RVM-PROJM1 Instruction Manual page 9

Table of Contents

Tools Needed2
Symbols3
Hardware Product Numbers3
Product Component Parts3
Step 1 - Remove The Ceiling Plate And The Cover4
Step 2 - Remove The Projector Plate4
Step 3 - Find Stud And Mark Edge And Center Locations5
Step 4 - Drill Pilot Hole And Mount Ceiling Plate5
Step 5 - Attach The Articulation Unit At The Ceiling Plate6
Step 6 - Attach The Projector Legs At The Projector Plate6
Step 7 - Attach The Projector At The Mount7
Step 8 - Lift And Hang The Projector7
Warranty Information8