Panasonic LUMIX DMC-G6GN Operating Instructions For Advanced Features page 57

Preparation
[Beep]
•
The [E-Shutter Vol] only works when [SH] for Burst Mode or [Electronic Shutter] is set to [ON].
[Speaker Volume]
•
When you connect the camera to a TV, the volume of the TV speakers does not change.
[Monitor Display]/
[Viewfinder]
•
It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is in
use.
•
Some subjects may appear differently from actuality on the monitor. However, this does not
affect the recorded pictures.
Set the volume for electronic noises and the electronic shutter
noise.
[Beep Volume]:
[u] (High)
[t] (Low)
[s] (OFF)
Adjust the volume of the speaker to any of the 7 levels.
Brightness, colour, or red or blue tint of the Monitor/viewfinder is
adjusted.
[ ] ([Brightness]):
Adjust the brightness.
[ ] ([Contrast · Saturation]):
Adjust the contrast or clarity of colours.
[ ] ([Red Tint]):
Adjust the red tint.
[ ] ([Blue Tint]):
Adjust the blue tint.
1
Touch the item.
2
Drag the slide bar to adjust.
•
Adjusting can also be performed by rotating the rear dial.
3
Touch [Set].
[E-Shutter Vol]:
[
[
[
57
] (High)
] (Low)
] (OFF)