Motion Picture
Recording Motion Picture
1
Start recording by pressing the motion
picture button.
A Elapsed recording time
B Available recording time
•
Recording of motion picture appropriate for each mode is
possible.
•
The recording state indicator (red) C will flash while
recording motion pictures.
•
If approximately 1 minute elapses without an operation
being performed, part of the display will disappear. Press
[DISP.] or touch the monitor to make the display
reappear.
•
When recording a motion picture, do not cover the
microphone with your fingers or other objects.
•
Release the motion picture button right after you press it.
2
Stop the recording by pressing the motion picture button again.
•
Still picture recording is also possible during the motion picture recording by fully
pressing the shutter button.
Enabling/disabling the motion picture button
[MENU] > [Custom]>[Video Button]>[ON]/[OFF]
•
This function is for preventing accidental operation of the button.
Switching between the angle of view for taking pictures and the one for
recording motion pictures
[MENU] > [Custom]>[Rec Area]>[!] (Picture)/[
•
When the aspect ratio setting is different in still and motion pictures, the angle of view
changes at the start of motion picture recording. When [Rec Area] is set to [
view during motion picture recording is displayed.
•
The recording area indicated is a guide line.
(P216)
214
A
3
3
3
s
s
s
] (Motion picture)
], angle of
C
1
1
37
37 37
R
R
m
m
s
s
B