LG FH6F9BDS Owner's Manual page 31

Wi-Fi Function
Communicate with the appliance from a smartphone
using the convenient smart features.
Washer Cycle
(Remote Start, Download Cycle)
Set or download any preferred cycle and operate by
remote control.
Tub Clean Coach
This function shows how many cycles remain before It is
time to run the Tub Clean cycle.
Energy Monitoring
Check the energy consumption of the recently used
cycles and monthly average.
Smart Diagnosis
This function provides useful information for diagnosing
and solving issues with the appliance based on the
pattern of use.
Settings
Various functions are available.
Push Alert
This function is to notify the status notification so that
the user can recognize the appliance status. The
notifications are triggered even if the LG SmartThinQ
application is off.
NOTE
• If you change your wireless router, internet service
provider, or password, delete the registered appliance
from the LG SmartThinQ application and register it
again.
• The application is subject to change for appliance
improvement purposes without notice to users.
• Functions may vary by model.
Using the Appliance Remotely
Remote Start
Use a smartphone to control your appliance remotely.
You can also monitor your cycle operation so you know
how much time is left in the cycle.
Using this function
1
Press the Power button.
2
Put the laundry into the drum.
3
Press and hold Remote Start button for 3 seconds
to enable this function.
4
Start a cycle from the LG SmartThinQ application
on your smartphone.
NOTE
• Once this function is enabled, you can start a cycle
from the LG SmartThinQ smartphone application.
If the cycle is not started, the appliance will wait to
start the cycle until it is turned off remotely from the
application or this function is disabled.
• When this function is turned on, the door is
automatically locked.
Disabling this function
When this function is activated, press and hold Remote
Start button for 3 seconds to disable this function. This
function must be turned off, so that the appliance can be
used manually.
Download Cycle
Download a new and special cycle that is not included in
the basic cycles on the appliance. A variety of specialty
cycles specific to the appliance can be downloaded
to the successfully registered appliances. Only one
cycle can be stored on the appliance at a time. Once
cycle download is completed in the appliance, the
product keeps the downloaded cycle until a new cycle is
downloaded.
31