Connecting Video Source Devices - BenQ MH684 User Manual

FN and the labeled function key simultaneously. Refer to your notebook's documentation to find
your notebook's key combination.

Connecting video source devices

You need only connect the projector to a video source device using just one of the
connecting methods, however each provides a different level of video quality. The method
you choose will most likely depend upon the availability of matching terminals on both the
projector and the video source device as described below:
Terminal name
Component Video
S-Video
Connecting audio
The projector has one built-in mono speaker which are designed to provide basic audio
functionality accompanying data presentations for business purposes only. They are not
designed for, nor intended for stereo audio reproduction use as might be expected in
home theater or home cinema applications. Any stereo audio input (if provided), is mixed
into a common mono audio output through the projector speaker.
The built-in speaker will be muted when the AUDIO OUT jack is connected.
• The projector is only capable of playing mixed mono audio, even if a stereo audio input is
connected. See
• If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the video source device is turned on and
operating correctly. Also check that the signal cables have been connected correctly.
24 Connection
HDMI
Video
"Connecting audio" on page 24
Terminal appearance
for details.
Picture quality
Best
Better
Good
Normal