Advertisement
12
Luxury Glide™ Oven Racks
The fully extendable Luxury-Glide™ rack makes food prepara-
tion easier. This oven rack has glide tracks that allow the rack to
be pulled away from the oven without rubbing the sides of the
oven wall.
Figure 3:
Luxury Glide™ rack
Always use pot holders or oven mitts when using the oven.
When cooking, the oven interior and exterior, as well as the oven
racks, will become very hot which can cause burns. Always
remove/replace the oven racks before turning on the oven (when
the oven is cool).
To install or replace the Glide Rack:
1.
Grasp both upper and lower portions of the Glide
Rack.(Figure
2.
Lift and hold the rack level between the oven cavity walls.
3.
Tilt the front of the rack upward slightly and slide the rack
completely into position. Some force may be necessary to
make sure the oven rack has snapped into place.
To remove the oven Glide Rack:
1.
Lift up on the release lever located across the lower front of
the rack, as shown in
2.
While holding up the release lever
Rack out of the oven until the stop position is reached. Use
two hands if necessary.
3.
Using both hands, grasp the upper and lower portions of
the Glide Rack
slightly and continue to pull the rack away from the oven.
4.
Be sure to grasp both upper and lower rack portions
together when removing or handling the Glide Rack. The
rack portions move independently and are difficult to handle
unless held together.
6).
(Figure
5).
(Figure
(Figure
6) and lift up the front of the rack
Release lever
Figure 4:
locked position
Figure 5: Extendable Glide Rack with release lever in
unlocked position. To release pull up on release
lever.
5) pull the Glide
Figure 6: Removing and replacing the oven Glide
Rack
Before Setting Oven Controls
Extendable glide rack with release lever in
Advertisement
