Cutout Dimensions For 36" Cooktops; Ventilation - Bosch NITP069SUC Installation Manual

Cutout dimensions for 36" cooktops

Models: NIT5668UC, NIT8669SUC, NIT8669UC,
NITP669SUC, NITP669UC

Ventilation

To assure that the appliance works correctly, the cooktop
MUST be sufficiently ventilated.
Since the ventilation in the lower section of the appliance
requires a sufficient supply of fresh air, the cabinet must
be designed accordingly. The following is required for
this:
A minimum clearance between the rear of the cabinet
and the kitchen wall, and between the surface of the
worktop and the upper area of the drawer.
6
An opening at the top to the rear of the cabinet.
If the minimum clearance of
provided at the rear of the cabinet, you must create an
opening on the underside.
If the inside of the cabinet is no wider than
29 / inch (750 mm), make cutouts in the side
1
2
panels.
Note: If the appliance is installed in an island unit or
another installation that is not described here, you must
ensure that the cooktop is sufficiently ventilated.
/ inch (20 mm) is not
13
16