Prepare Installation Space; Cutout Dimensions; Installation Procedure; Secure Cooktop To Countertop - Bosch NEM5466UC Installation Manual

Prepare Installation Space
Create the cut-out in the countertop according to the
installation diagram. The angle of the cut surface to the
countertop must be 90 °.
The lateral cut-out edges must be flat in order to ensure
that the retaining springs are well-positioned on the
appliance. With multi-layered countertops, secure strips
laterally in the cut-out if necessary.
After creating cut-out, remove shavings. Seal cut
surfaces in a heat- and water-resistant manner.
Observe minimum distance between device underside
and furniture parts of 3/s" (10 mm).
Cutout dimensions
[ J
€
rain. 30" (762 ram)
I
/
rnin. 2" ,_ rain. 2"
(51 ram) ' (51 ram)
(6ram) --,,=- /
min, 2" (51mm)
/..i/_._"_.. min, 2 1/4" (57mm)
installation Procedure
• , CAUTION
Sharp edges. Use protective gloves when installing
the cooktop.
Secure cooktop to countertop
The cooktop should be secured to the countertop using
the clamps provided.
1. Prior to inserting cooktop into cutout, attach clamps to
the corresponding slots.