Connection To A Television - Panasonic DVD-RP56 Operating Instructions Manual

Connection to a television

This page explains how to connect the unit to a television and set it up so you hear the audio through the television's speakers. Connections and
procedures that enable you to enjoy more powerful sounds are described beginning on page 23.
Disconnect the AC power supply cord.
Refer to the television's operating instructions.
AUDIO VIDEO
IN IN
L
R
Audio/video cable (included)
VIDEO S VIDEO
AUDIO OUT
OUT OUT
L
SUB- R
WOOFER
S VIDEO OUT terminal
The S-video terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance (Y)
signals. (Actual results depend on the television.)
COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or progressive out-
put and provide a purer picture than the S VIDEO OUT terminal.
Connection using these terminals outputs the color difference signals
(P /P ) and luminance signal (Y) separately in order to achieve high
B R
fidelity in reproducing colors.
The description of the component video input terminals depends on
the television or monitor (e.g. Y/P
nect to terminals of the same color.
After making this connection, change the black level for a better pic-
ture (á page 21, Video–Black Level Control).
6
RQT6012
Television
AC power supply cord
(included)
Back of the unit
COMPONENT
VIDEO OUT
(480P/480I)
Y
AC IN
P
B
P
R
/P , Y/B-Y/R-Y, Y/C /C ). Con-
B R B R
Audio/video cable (included)
Yellow (VIDEO)
White (L)
Red (R)
To household
AC outlet
(AC 120V, 60 Hz)
S VIDEO OUT terminal
S-video cable (not included)
COMPONENT VIDEO OUT terminal
Video cable (not included)
Y
P
B
P
R
To enjoy progressive video
1. Connect to the component video (480p) input terminals on
a television compatible with this unit's copy guard system.
2. Press [PROGRESSIVE OUT] on the front panel so the
indicator lights (á page 9).
Note
The screen may shift off center when using progressive out-
put. Adjust the position of the screen if this occurs
(á page 19, Video—Horizontal position).
Video will not be displayed correctly if you connect to a
television that is incompatible with this unit's copy guard
system.
The unit does not output video signals from the VIDEO OUT
and S VIDEO OUT terminals when the "PROGRESSIVE
OUT" indicator is on.
For your reference
All televisions manufactured by Panasonic and that have 480p
input connectors are compatible. Consult the manufacturer if
you have another brand of television.
Conserving power
This unit consumes a small amount of power, even when it is turned
off (approx. 2 W). To save power when the unit is not to be used for a
long time, unplug it from the household AC outlet.
Connect Your Unit Directly To Your
Television.
Do not connect the unit through your video cassette recorder
when setting up your home entertainment system, because
the picture may not be played correctly due to the copy guard.
TV's S-video
input
terminal
Y terminal
P terminal
B
P terminal
R
TV's component video
input terminals