Armpit Attachment (Bri956, Bri959); Bikini Attachment (Bri956, Bri959); Precision Attachment (Bri953, Bri954); Selecting The Right Light Intensity - Philips Lumea Prestige BRI954/00 Manual

20
English

Selecting the right light intensity

Armpit attachment (BRI956, BRI959)

The armpit attachment has a specifically curved-out design to treat hard to
reach armpit hairs.

Bikini attachment (BRI956, BRI959)

The bikini attachment has a specialized design for effective treatment of
bikini areas. It has a curved-out design with transparent bikini filter. Hair in
this area tends to be typically thicker and stronger than leg hair, therefore
the bikini area attachment has a special filter for treating the coarser hair in
the bikini area.

Precision attachment (BRI953, BRI954)

The precision attachment is curved-out for use in bikini and armpit areas. It
has a medium sized window with an extra transparent filter. It is designed
for precise and effective coverage of bikini and armpit areas.
Lumea provides 5 different light intensities and advises you on the right
setting you should use based on your skin tone. You will always be able to
change to a light intensity setting you find comfortable.
1 Press the on/off button to turn on the device. The device starts to
operate at light intensity setting 1.
Note: To adjust the light intensity setting manually without using the skin
advice, use the toggle button until you have reached the required setting.
The corresponding intensity light level lights up white.
2 Press the SmartSkin sensor ( ) and put the device to your skin.
3 After the device scanned your skin, the suggested intensity lights will
blink white to indicate which intensities you can use based on your skin
tone.
4 Press the confirmation button ( ) to confirm that you want to use the
suggested setting advice to start using the device.