Advertisement
3.2 Wash programs
Before starting a wash program check that:
CANCELLING A PROGRAM IN PROGRESS
CHANGING THE PROGRAM
To change the program in progress, simply open the door and select a
new program. When the door is closed the dishwasher will automatically
select the new program.
12
User instructions
The water supply tap is open.
The softener container contains regenerating salt.
The correct amount of detergent has been added to
the dispenser.
The baskets have been correctly loaded.
The spray arms are able to rotate freely and without
obstruction.
The dishwasher door is securely closed.
Open the door, taking care to avoid splashes of water, and hold
down the PROGRAM SELECTION (3) button for a few seconds
until the
indicator lights for programs 4 and 5 illuminate
simultaneously (marked "end").
Close the door.
After approximately 1 minute the dishwasher will advance to the
end of cycle.
Advertisement
