Table of Contents
Advertisement
2-3 Antenna Connections
Please select the connection method based on the
signal cable at your home.
You may not have the standard coaxial cable at
home (Please check A).
Some families may have an older 300-Ohm Twin
Lead Cable (Please check B).
A
VHF Only Or VHF / UHF Or Cable
75-Ohm
Coaxial Cable
B
VHF Only Or UHF Only Or VHF / UHF
300-Ohm Twin
Lead Cable
Antenna Connector
Some pay CATV systems use encoded or encrypted signals. You need a decoder to
watch all channels.
1 Please connect the coaxial cable joint of CATV to the IN hole of decoder.
2 Connect the OUT hole of decoder to the TV In socket of your TV set by the coaxial
cable.
Side of TV
Cable
Cable
Box
In
Out
NOTE:
To watch TV program, please see "Section 3.1 Turning on your LCD TV and
watching a TV program" on page 18.
VHF / UHF
Rear of TV
VHF / UHF
Rear of TV
NOTE:
Consult the Dealer or Service Center for
TV In
the type of splitter, RF switch or combiner
that might be required.
13
20" LCD TV User's Manual
Advertisement
Table of Contents
