Antenna Connection - Westinghouse UW32S3PW User Manual

Cable TV lead in
VHF, UHF or VHF/UHF
combination antenna
75 ohm coaxial cable (round)
300 ohm twin-lead (flat)
Separate VHF/UHF Antenna
VHF Antenna UHF Antenna
300 ohm twin-lead
75 ohm coaxial cable
The unit has a TV tuner (75 ohm coaxial cable connector) located on the rear I/O
panel for easy cable hookup. When connecting the 75 ohm coaxial cable to the unit,
screw the 75 ohm cable to the TV tuner. Some cable TV companies offer premium
pay channels. Since the signals of these channels are scrambled, a cable TV
converter/descrambler is usually provided to the subscriber by the cable TV
company. This converter/descrambler is necessary for normal viewing of the
scrambled channels. (Set your TV to channel 3 or 4. Typically one of these channels
is used. If a channel is unknown, consult your cable TV company.) For more specific
instructions on installing cable TV, consult your cable TV company. One possible
method of utilizing the converter/descrambler provided by your cable TV company is
explained below.
300-75 ohm ADAPTER
(Not supplied)
300 ohm twin-lead COMBINER
(Not supplied)
IN OUT
NOTE:
The F-type connector should be finger-tightened only.
When connecting the RF cable to the LED TV, do not
tighten F-type connector with any tool. If tools are used,
it may cause damage to the LED TV (e.g. breaking of
internal circuit).

ANTENNA CONNECTION

Home Antenna
terminal (75 ohm)
RF IN