Answer Mode
Flip Open
This function allows you to answer an incoming call by directly opening the flip, but
without pressing the Send Key or OK Key .
Any Key
This function allows you to answer an incoming call by pressing any key on the
keypad .
Security Settings
Phone Password
A password can protect your phone and help avoid illegal use . If your phone is
password protected, you will have to enter the correct password when the phone
is turned on .
• For a new phone, the protection function is not activated by default, and the
default password is 0000 .
• From standby mode, select Menu Settings Security Activate security
codes Phone lock code to start or stop password protection .
• From standby mode, select Menu Settings Security Change security
codes Phone lock code to change the phone's password . It is suggested
that you change the password to something you will easily remember .
Notes:
• Please remember the password you set . Without it your phone cannot be used
normally and you will need to contact your service provider to unlock it .
• Contact your service provider for more information .
38
PIN Codes
A PIN code is the personal identification code used by the SIM card . Its purpose
is to help you avoid illegal use of your SIM card . The correct PIN code should be
entered when the new phone is first turned on, otherwise the phone will only be
able to make emergency calls .
• For a new card, the default code is supplied by the service provider .
• From standby mode, select Menu Settings Security Activate security
codes PIN code to enable or disable the PIN code .
• From standby mode, select Menu Settings Security Change security
codes PIN code to change the PIN code .
• If you enter the wrong PIN code three times in a row, the phone will lock the SIM
card and prompt you to enter a PUK code to unlock it .
Notes:
• If you change the PIN code, be sure to remember the new number .
• PIN2 is needed for some settings . Use the same procedure as for the PIN code .
PUK Codes
A PIN Unlock Key (PUK) code is the unlock code for the SIM card . When the SIM
card is locked, you have to enter the correct PUK code and then enter the new PIN
code . The SIM card can then be used normally .
• A PUK code may be supplied with a new card . Contact your service provider for
more information .
• A PUK code can only be entered 10 times in a row . If you enter the wrong PUK
code more than 10 times, the SIM card will be locked indefinitely .
Note: If a PUK code is supplied with the new card, remember to store it safely .
Settings
Settings
39